LS600

LS600把PS10-R2音箱系统的可用频率下限伸延至38Hz, 使紧凑轻盈箱体也能有高性能和高输出(峰值:138dB).

单只LS400一般与2只PS8-R2音箱组合使用, 当然也可以音

箱来把系统低频增强. PS10-R2处理器整合低频和简化合并讯

号(PS10-R2与LS600)往输出插座, 使系统更容易接驳和使用.

PS10TDController-R2

PS10TDController-R2处理器是一个先进的模拟

电子处理器,它使细小的PS10-R2全频音箱匹配

LS600超低成为超凡性能的系统. PS10TDController-R2提供精密的分频,功放的感

测和系统均衡的服务.PS10TDController-R2

有两个输入通道和三个输出,左右和合并的低频

讯号, 可简化系统和安装的成本.与所有力素的

处理器一样,PS10TDController-R2利用内置预

选的压控均衡VCEQ线路提供精准的动态,音圈温度和纸盘推挽冲程保护,策略性的只在某些必需

的频率作出适当的衰减.

PS10-R2

A high power system capable of producing 132dB Peak SPL, the new PS10-R2 loudspeaker can be safely driven with up to 1250 Watts of amplifier power. Controlled by the new dedicated PS10TDController-R2, or the NXAMP Powered Controller, the PS10-R2 achieves high SPLs and wide bandwidth performance, despite being only half the weight and volume of common trapezoidal loudspeaker systems.Along with the flexible

coverage patterns enabled by NEXO’s proprietary constant directivity asymmetrical dispersion horn, the architecture and weight balance of the PS10-R2 are designed to provide both uncompromised PA and stage monitor performance from a single speaker. Left and right version of the PS10-R2 have been developed to provide a true stereo image - particularly important for wedge applications. The 2 way passive 8 Ω design uses a single amplifier channel to deliver bi-amped performance, reducing system cost, size and complexity, while the new cabinet design incorporates a pole mount and a new hardware adapter compatible with a vast array of touring and fixed installation accessories.

LS600

A high power system capable of producing 138dB Peak SPL, the new LS600 Subwoofer extends the usable range of the PS8-R2  Loudspeaker to 38Hz, providing exceptional performance and high power output in an extremely compact, light weight package. The PS10TDController-R2 integral sub section combined signal (PS10-R2 + LS600) Speakon wiring ensure cost effective and simple implementation.One LS600 is typically used with 2 PS10-R2

loudspeakers, additional units may be used for an enhanced LF impact.

PS10TDController-R2

The PS10TD-R2 Controller is an advanced analogue processor that allows the PS10-R2  Loudspeaker and optional LS600 Subwoofer to achieve exceptional  performance from such compact package. The PS10TDController-R2 provides crossover, sensed amplifier control and system equalisation, optimised for the PS10-R2 and LS600. Each PS10TDController-R2 has two inputs and three outputs, L, R and summed sub out, minimising installation cost and complexity. Like all Nexo processors, the PS10TDController-R2 provides

precision dynamic, voice coil temperature and diaphragm displacement protection through the use of selective Voltage Controlled Equalisers (VCEQs), strategically reducing levels only at frequencies when and where necessary.

PS10-R2

PS8-R2是一个能输出132dB峰值声压的高功率系统.它能安全可

靠地承受1250Watts的功放功率. 使用新的专用PS10-R2模拟处

理器, 或NXAMP带处理器功放, PS10-R2系统可达成高声压和宽

频响的性能, 而箱体重量和尺寸只是一般矩形箱体音箱的一

半.拥有力素专有的恒定指向性非对称扩散角号, 箱体建构和

重心平给于PS10-R2在各种应用上有很大的弹性.设计考虑到

能给于有高要求的扩声和表演台返送作单箱作业的.

PS10-R2上还有左右镜像对称的形号可选, 使PS10-R2可作真正

立体声对称返送监听. PS10-R2, 2路全频8Ω的设计可简单的

使用单功放来达到一般双功放推动(bi-amped)的性能, 从宜减

低系统的成本,重量和复杂程度. PS10-R2箱体设有一个标准插

柱孔和可使用一个适配硬件来兼容力素大量的流动演出和固定安装配件

PS10-R2 系统应用

> 流动演出的近场使用

> 固定安装项目如会所,影音,剧场,广播等的音响系统

> 会所影音,剧场,广播等的高质素监听系统.

> 作为支援大形演出系统如力素Alpha,GEO等所需的各类补声

PS10-R2    System Applications

> Touring, installed PA for clubs, A/V, theatre, broadcast,

  Houses of Worship, theme parks, etc.

> High quality, low profile stage monitoring for clubs, A/V,   

   theatre, broadcast, etc.

> Near field, down fill and under balcony systems in support of

  large systems like NEXO PS/GEO/Alpha

LS600 主要特性

> 高功率(138dB峰值 SPL @1m)15”长冲程的超低频推动单元

> 把PS10-R2系统的频响下展至38Hz

> 先进的电子处理器保证系统操作的线性和可靠度

> 箱体置插孔可支撑单只或2只PS10-R2音箱

LS600 系统应用

> 流动演出的近场使用, 固定安装项目如会所,影音, 剧场,

 广播等的音响系统

> 会所, 影音, 剧场和广播场地所需的高质素监听系统

> 作为支援大形演出系统如力素Alpha,GEO等所需的各类补声

> 任何需要高性能侧补,下补和增强近场等的应用

LS600 Key Features

> High power system (138dB Peak SPL @ 1m) with 15” VLF long

  excursion driver.

> VLF extension (to 38Hz) of PS10-R2 Loudspeakers.

> Sophisticated control electronics ensure reliable, linear

  operation.

> Integral pole mount that supports 1 or 2 PS10-R2

  Loudspeakers.

LS600 System Applications

> Touring, installed PA for clubs,A/V,theatre,broadcast,

  Houses of Worship, theme parks, etc.

> High quality,low profile stage monitoring for clubs,A/V, theatre,

  broadcast, etc.

> Fill-in system for use with larger NEXO PS/GEO/Alpha systems

> Any application needing exceptional side, down and near field

  Augmentation.

PS10TD-R2 主要特性

> 专为PS10TDController-R2/LS600系统设计的

 精密线路,提升系统的声压和操作的稳定性.

> 伺服操控的VCEQ线路提供无频谱失衡准确的

 动态控制

> PS10TDController-R2有两个输入三个输出,

 单机可处理多组PS10-R2和LS600

> 面板LED显示灯显视增益和运作.

PS10TDController-R2  Key Features

> Precision circuits engineered for the PS10-R2/LS600 systems permit

   increased sound pressure and operational reliability.

> Servo controlled VCEQs provide precise dynamic control without spectral

  imbalance.

> 2 inputs and 3 outputs enable a single PS8TDController-R2 to manage

  multiple PS10-R2 and LS600 products.

> Comprehensive indicators and controls.

PS10-R2  Key Features

> High power system ((132dB Peak SPL@1m)

> New 10in LF and 1 in HF Neodymium drivers

> Rotatable, asymmetrical horn and unique cabinet architecture

  ensure versatility; user-adaptable for both PA and stage

  monitoring application

> 2 way passive, 8Ω design uses a single amplifier channel for

  simple installation and lower cost.

> Advanced control electronics ensure reliable,linear operation.

> Supported with a full range of mounting and flying accessories

  (Click to see accessories)

PS10-R2 产品主要特性

> 高功率系统(132dB峰值声压@1m).

> 使用新设计的低磁辐10”(低频)和1”(高频)铵金属单元

> 可旋转, 非对称角号和独特箱体构造,用途多元化,用家轻易

 配置为扩声或返送使用.

> 2路全频8 Ohms的设计使用单通道推动,因此安装简单易用和

 较经济.

> 先进的电子处理保证系统操作的线性和可靠度.

> 备有全线各类安装和吊挂配件的支援. >按此看吊挂配件