PS10音箱能安全地承受500Watts的功放功率, 但其重量和箱体只是一般距形音箱的一
半.PS10的扩散,建购和重量平衡的设计,均是为多用途流动演出和固定安装上能提供高性能单箱操作.力素专有的恒定指向性非对称扩散角号,在应用上有很大的弹性. 用家
可以很容易地改变角号的四个90°方位. 因应用途,角号耦合出独特的水平渐进式(50°-
的水平或垂直覆盖方位来作扩声或返送.
PS10采用了无源两分频8欧姆阻抗的设计,是
高功率系统（标称峰值SPL＠1m,127dB及10寸低音单元和寸高音单元. 体重:15kg. 专用的PS10TD 处理器提供全面性的保护
和操控.
全线完备的多种固定和吊挂配件.
PS10TDController处理器是一个先进的模拟电子处理器,它使细小的PS10全频音箱匹配LS500超低成为超凡
性能的系统.PS10TDController提供
精密的分频,功放的感测和系统均衡的服务.
PS10TDController有两个输入通道和三个输出,左右和合并的低频讯号, 可简化系统和安装的成本.与所有力素的处理器一样,PS10TDController利用内置预选的压控均衡VCEQ线路
提供精准的动态,音圈温度和纸盘推挽冲程保护,策略性的只在某些必需
的频率作出适当的衰减.
产品主要特性
> 专为PS10TDController/LS500系统
设计的 精密线路,提升系统的声压和
操作的稳定性.
> 伺服操控的VCEQ线路提供无频谱失
衡准确的动态控制
> PS10TDController有两个输入三个输出, 单机可处理多组PS10和LS500
> 面板LED显示灯显视增益和运作.
The PS10 loudspeaker can be safely driven with over 500Watts of amplifier power,
yet is is only half the weight and volume of standard trapezoidal systems. The dispersion,
architecture and weight balance of the PS10 loudspeaker are designed to provide both
exceptional PA and stage monitor performance from a single product without compromise.
This flexibility is realized by a proprietary constant directivity asymmetrical dispersion
horn, easily rotated in four positions by the user. Coupled with the horn’s unique
progressive horizontal (50° to 100°) and vertical (55°) dispersion, the most suitable
pattern can be selected for vertical or horizontal PA usage or wedge monitoring.
The 2 way passive 8 Ω design uses a single amplifier channel to deliver bi-
High power system (127dB Peak SPL @ 1m) with new 10” LF and 1” HF low magnetic emission Neodymium drivers for light weight (15 kg, 33lbs). Sophisticated control electronics ensure reliable, linear operation. Supported with a full range of mounting and flying accessories.
LS500是一个15寸高性能高效率超低频音箱（标称峰值SPL＠1m,134dB）;LS500把PS10音箱系统的可用频率下限伸延至38Hz,使紧凑轻盈箱体也能有高性能和高输出.
单只LS500一般与2只PS10音箱组合使用,当然也可以音箱来把系统低频增强. PS10TDContoller处理器整合低频和简化合并讯号(PS10与LS500)往输出插座, 使系统
更容易接驳和使用. 这设计先进的控制电
路确保其可靠性和线性操作;
产品主要特性:
> 高功率(138dB峰值 SPL @1m)15”长冲程
的超低频推动单元
> 把PS10系统的频响下展至38Hz
> 先进的电子处理器保证系统操作的线性
和可靠度
> 先进的电子处理保证系统操作的线性和
可靠度.
> 备有全线各类安装和吊挂配件的支援. LS500箱体顶部设有杆孔可以安装1只或2只PS10音箱。
The LS500 Subwoofer extends the usable range of the PS10 loudspeaker to 38Hz, providing high performance and high power output (134 dB Peak) in an extremely compact, light weight package. The PS10 TDController’s integral sub section and combined signal (PS10 and LS500) Speakon wiring ensure cost effective and simple system implementation. One LS500 is typically used with 2 PS10 loudspeakers, additional units may be used for an enhanced effect. LS500 subwoofer are designed to work with NEXO’s advanced electronic processors, guaranteeing consistent performance and reliability of the highest standard.
Key Features
> High power system (134B Peak SPL @ 1m) with 15” VLF long excursion driver.
> VLF extension (to 38Hz) of PS10 Loudspeakers.
> Sophisticated control electronics ensure reliable, linear
operation.
> Integral pole mount that supports 1 or 2 PS10 Loudspeakers.
The PS10TDController is an advanced analogue processor that allows the PS10 Loudspeaker and optional LS500 Subwoofer to achieve exceptional performance from such compact package. The PS10TDController provides crossover, sensed amplifier control and system equalisation, optimised for the PS10 and LS500. Each PS10TDController has two inputs and three outputs, L, R and summed sub out, minimising installation cost and complexity. Like all Nexo processors, the PS10TDController provides
precision dynamic, voice coil temperature and diaphragm displacement protection through the use of selective Voltage Controlled Equalisers (VCEQs), strategically reducing levels only at frequencies when and where necessary.
Key Features
> Precision circuits engineered for the PS10/ LS500 systems permit increased sound pressure
and operational reliability.
> Servo controlled VCEQs provide precise dynamic control without spectral imbalance.
> 2 inputs and 3 outputs enable a single PS8TDController to manage multiple PS10s & LS500s.
> Comprehensive indicators and controls.
