PS15能安全可靠地承受1000Watts的功放功率.  

PS15系统可达成高声压和宽频响的性能, 而箱体重量和尺寸比一般矩形箱体音箱都小得多.拥有力素专有的恒定指向性非对称扩散角号, 箱体建构和重心平给于PS15在各种应用上

有很大的弹性.设计考虑到能给于有高要求的扩声和表演台返送作单箱作业的. PS15, 2路全

频8Ω的设计可简单的使用单功放来达到一般双功放推动(bi-amped)的性能,从宜减低系统的成

本,重量和复杂程度.

PS15箱体设有一个标准插柱孔和可使用很多的流动演出和固定安装配件

产品主要特性

> 高功率系统(134dB峰值声压@1m).

> 使用新设计的15寸(低频)和1寸(高频)铵金属

单元

> 可旋转,非对称角号和独特箱体构造,用途多

元化,用家轻易配置为扩声或返送使用.

> 2路全频8 Ohms的设计使用单通道推动,因此

安装简单易用和较经济.

> 先进的电子处理保证系统操作的线性和可靠

度.

> 备有全线各类安装和吊挂配件的支援.

LS1200是一个18寸高性能高效率超低频音箱（标称峰值SPL＠1m,135dB）;LS1200把PS15音箱系统的可用频率下限伸延至29Hz,使紧凑轻盈箱体也能有高性能和高输出.

单只LS1200一般与2只PS15音箱组合使用,当然也可以音箱来把系统低频增强. PS15TDContoller处理器整合低频和简化合并讯号(PS15与LS1200)往输出插座, 使系统

更容易接驳和使用. 这设计先进的控制电

路确保其可靠性和线性操作;

产品主要特性:

> 高功率(135dB峰值 SPL @1m)18寸长冲程

的超低频推动单元

> 把PS15系统的频响下展至29Hz

> 先进的电子处理器保证系统操作的线性

和可靠度

> 先进的电子处理保证系统操作的线性和

可靠度.

> 备有全线各类安装和吊挂配件的支援. LS500箱体顶部设有杆孔可以安装1只或2只PS15音箱。

PS15TDController-V2处理器是一个先进

的模拟电子处理器,它使紧凑的PS15全频

音箱匹配PS15Bass & LS1200超低成为极

高性能的系统. PS15TD-V2提供精密的分

频,功放的感测和系统均衡的服务.处理

器亦提供由用家选设PS15全频或有源双推动模式. PS15TD-V2有两个输入通道

和三个输出,左右和合并的低频讯号, 可简化系统和安装的成本.与所有力素

的处理器一样,

PS10TD-V2利用内置预选的压控均衡

VCEQ线路提供精准的动态,音圈温度和纸盘推挽冲程保护,策略性的只在某些必需的频率作出适当的衰减.

产品主要特性

> 专为PS15TDController-V2 /PS15Bass /LS1200系统设计的精密线路,提升系统

的声压和操作的稳定性.

> 伺服操控的VCEQ线路提供无频谱失衡

准确的动态控制

> PS15TD-V2有两个输入三个输出,

 单机可处理多组PS15,PS15Bass 和 LS1200

> 用家可设定使用全频或有源双推动模

式

> 面板LED显示灯显视增益和运作.

PS15Bass是用来增强PS15系统于40-200 Hz的声

压以应付需要重低音的场合.在单只PS15操作时

可在旁加接多一只PS15Bass在同一处理器和功放

通道推动便可(当然功放通道的负载必须在指标

之内),由于PS15 Bass与PS15的体积,前面和建

构是一致的所以可以放在一旁操作而外观与声学

的耦合都很好.PS15Bass的梯型外型加强了系统

低频音量和频响向下更延伸.

产品主要特性:

> 高功率系统标称峰值SPL＠1m,134dB 及15寸

低音单元

> 低频相位较正处理器；

> 具有与PS15的外形及结构；

> 简易安装及连线；

> 设计先进的控制电路确保其可靠性和线性操作

The PS15 loudspeakercan be safely driven with more than to 1000 Watts of amplifier power. The PS15-R2 achieves high SPLs and wide bandwidth performance, despite being reduced weight and volume compared to common trapezoidal loudspeakers. Along with the flexible coverage patterns enabled by NEXO’s proprietary constant directivity asymmetrical dispersion horn, the architecture and weight balance of the PS15 are designed to provide uncompromised PA and wedge monitoring performance from a single speaker. The 2 way passive 8 Ω design uses a single amplifier channel to deliver bi-amped performance, reducing system cost, size and complexity, while the cabinet design incorporates a pole mount and vast array of touring and fixed installation accessories.

Key Features

> High power system (134dB PeakSPL@1m)

> 15in LF and 2 in HF Neodymium drivers

> Rotatable, asymmetrical horn and unique cabinet architecture   ensure versatility;

user-adaptable for both PA and stage

monitoring application

> 2 way switchable passive or active design for precise performance matching to user requirements.

> Sophisticated control electronics ensure reliable,linear operation.

> Supported with a full range of mounting and flying accessories

The PS15Bass increases PS15 loudspeaker sound pressure levels in the 40 to 200Hz regions for bass heavy applications and when single PS15s are used without the benefits of multiple cabinets coupling. The PS15 Bass is connected parallel with a PS15 and doesn’t required an additional controller or amplifier channel (provided the combined load is within the amplifier’s specification). The PS14 Bass has the same size front and grill, so cluster are visually and acoustically coherent. It’s deeper trapezoidal cabinet provides increased volume for extended bass response.

Key features:

> High power bass reinforcement for PS15 (134dB peak SPL@ 1m) with 15” LF driver.

> Low phrase shift passive crossover.

> PS15 compatible shape and architecture.

> Easy set-up and cabling.

> Sophisticated control electronics ensure reliable, linear operation.

The LS1200 Subwoofer extends the usable range of the PS15 loudspeaker to 29Hz, providing high performance and high power output (135 dB Peak) in an extremely compact, light weight package. The PS15 TDController’s integral sub section and combined signal (PS15 and LS1200) Speakon wiring ensure cost effective and simple system implementation. One LS1200 is typically used with 2 PS15 loudspeakers, additional units may be used for an enhanced effect. LS1200 subwoofer are designed to work with NEXO’s advanced electronic processors, guaranteeing consistent performance and reliability of the highest standard.

Key Features

> High power system (135B Peak SPL @ 1m) with 18” VLF long excursion driver.

> VLF extension (to 29Hz) of PS15 Loudspeakers.

> Sophisticated control electronics ensure reliable, linear

  operation.

> Integral pole mount that supports 1 or 2 PS15  Loudspeakers.

The PS15TDController-V2 is an advanced analogue processor that allows the PS15  Loudspeaker and optional PS15Bass and LS1200 Subwoofer to achieve exceptional  performance from such compact package. The PS15TD-V2 provides crossover, sensed amplifier control and system equalisation, optimised for the PS15, PS15Bass and LS1200. The PS15TD-V2 also features user selectable passive or active (bi-amp) operation of the PS15 loudspeaker. Each PS15TD-V2 has two inputs and three outputs, L, R and summed sub out, minimising installation cost and complexity. Like all Nexo processors, the PS15TD-V2 provides precision dynamic, voice coil temperature and diaphragm displacement protection through the use of selective Voltage

Controlled Equalisers (VCEQs),strategically reducing levels only at frequencies when and

where necessary.

Key Features

> Precision circuits engineered for the PS15 / LS1200 systems permit increased sound pressure

and operational reliability.

> Servo controlled VCEQs provide precise dynamic control without spectral imbalance.

> 2 inputs and 3 outputs enable a single PS15TD-V2 to manage multiple PS15 & LS1200 products.

> User configurable for passive and active (bi-amp) operation of the PS15

> Comprehensive indicators and controls.